10 Energy Saving Tips for Fall

The nights are cool, and the days are warm - Fall is here!  While the leaves change and the trees prepare for cooler temperatures, it's time to prepare your house to keep the heat in and cool air out.

Here are 10 tips to make your house more energy efficient for the winter:

1. Schedule a tune up for your heating system. Not only will this help your furnace run more efficiently, but it may help prevent a break down in the cold winter months. 
2. Replace your furnace filter. Continue to replace it once a month while in use. 
3. Find and seal any air leaks caused by pipes or lines entering your house. 
4. Add caulk or weather stripping to leaky doors and windows. 
5. Check your fireplace damper to ensure it is closed when not in use. 
6. If you never use your fireplace seal the fireplace flue damper and make it as snug as possible. 
7. Add caulking to the fireplace hearth.
8. Take advantage of the heat from the sun - open the drapes during the day to allow the sun to come in and close them at night to keep the warmth in. 
9. Use a heavy-duty, clear plastic sheet on a frame or tape clear plastic film to the inside of your window frames during the cold winter months. 
10. Your water heater can account for 14%-25% of your heating costs. Turn down the setting on your hot water heater to warm - or 120 degrees. 

For more ways to save check out www.IDTEnergy.com

Vegetable Electricity: Potato Power

Can your everyday vegetable power a light?  How about a clock?  You betcha.  Looking for a fun weekend project with the kids that just might 'jolt' some excitement into learning?  We gotcha covered.

Via

Electricity generated at power plant is generally generated from burning fossil fuels.  The heat from the fuel heats up water and the water becomes steam.  This steam then spins turbines which turns a generator (or magnet) and unbalances the charges in atoms and supplies a current of electricity. That electricity then flows through the utilities lines and into our homes.

Batteries are able to generate electricity through a chemical reaction between two types of electrodes (like zinc and copper) and an electrolyte.  The connection of these substances creates a circuit that allows a flowing path of electricity.

Via

Here's how you do it:

Materials
2 Potatoes
2 Short pieces of copper wire
2 Galvanized nails
3 Alligator clips
1 Piece of sand paper
1 Low voltage clock

Directions

1. Remove the battery from the clock
2. Number the potatoes "1" and "2"
3. Insert one nail into each of the potatoes
4. Insert one piece of wire into each of the potatoes
5. Connect one alligator clip to the copper wire in potato #1 to the positive (+) terminal in the clocks battery compartment
6. Connect the other alligator clip to the nail in potato #2 and the negative (-) terminal in the clocks battery compartment
7. Connect the last alligator clip to connect the nail in potato #1 to the copper wire in potato #2

A pretty neat alternative energy supply right? Talk about going green!

Now, of course, this method of electricity is not that reliable. So we suggest keeping your utility and an energy supplier like IDT Energy for a more reliable source of electricity.

Check out more cool energy related projects on our Pinterest.

Sources: Education.com and teachengineering.org/ 

Five Quick Energy Saving Tips: IDT Energy

We all want to save money on our energy bills. Whether you’re using IDT Energy or another company, you’ll want to stay on top of your energy use and minimize your superfluous expenditures as much as possible. Here are five quick ways to stay on track with your energy spending.

1. When you wash dishes and clothes, try to do so with a full load. One full load certainly uses less energy than do two half loads.

2. To save water, make sure to only boil the amount of water that you actually need.

3. Pay attention to your water taps. Fix leaky taps and make sure that your taps are always fully turned off. A tap that is continually dripping even a small amount makes enough hot water to fill half a bath in a week!

4. Pay attention to the light bulbs that you purchase and look for the ENERGY STAR label. Energy efficient light bulbs can save you a great deal of money over the life of the bulb, and they last up to 10 times longer than do ordinary bulbs.

5. Have a home energy check done on your house. Many companies conduct these checks and they will offer you other suggestions for saving on your electricity and gas bills and will provide quick tips for saving in the home.